SOTO×DRESS Slide Gas Torch
A small, wind-resistant burner with an extendable nozzle. Extend it for safety when in use, and retract it for compact storage.
Comes with a safety cap to prevent accidental activation in your pocket or luggage.
It also prevents dust and other particles from entering the inside of the burner, reducing problems such as poor ignition.
The powerful wind-resistant burner with a flame temperature of 1,300℃ supports your outdoor activities! Safely ignites a variety of things.
The fuel is refillable. In addition to economical cassette gas, lighter gas can also be used.
■Standards:
Country of origin: Japan Nozzle diameter: 14mm
・Flame temperature: 1,300℃
Flame size: diameter 3 x 15 mm
Flame shape: Ultra-fine concentrated flame Fuel used: Economical cassette gas, lighter gas Continuous use time: Up to 30 seconds
Width 38 x depth 18 x height 115-185 mm
52g
*The tip of the lighter becomes hot during and immediately after use, so do not bring it close to flammable objects or touch it. Always hold the lighter knob when extending or retracting the lighter. *Do not use for more than 30 seconds continuously. The area around the lighter may become very hot, causing burns, deformation or damage to the main body. *Do not use intermittently even for less than 30 seconds. *At high temperatures, at high altitudes with low air pressure, or when filled with lighter gas, the flame may not go out for a while due to residual gas. In that case, turn the gas adjustment knob in the - (minus) direction to adjust. Be sure to check that the lighter is out. *It may not ignite at high altitudes with low air pressure. *Do not point the lighter at your face or hands when lighting or using the lighter. There is a risk of burns. Do not use to light cigarettes. (Be careful as the flame is difficult to see.) *Do not bring it close to oily objects when lighting or using the lighter. This may cause a malfunction. *Be sure to lock the safety lock switch after use. *After use, make sure the burner has cooled down and then put the burner cap on. *After use, make sure it is out of the fire and store it in a place below 40°C out of reach of children. Never place it in a high temperature place such as a stove or a burner, or in a car exposed to direct sunlight. *Be careful not to get any dirt on the burner. It may cause the nozzle to become clogged. If wax adheres to the burner when lighting the candle, remove it after the burner has cooled down. *Be careful not to get chemicals such as alcohol on it. It may damage the resin of the main body. *Do not disassemble or modify it without permission, or use it with parts or accessories other than our genuine parts. We are not responsible for any accidents or quality guarantees that occur in such cases. *Do not deform the electrode inside the burner. *Do not rotate the burner or slide pipe. *Adjust the gas between + and -, and do not rotate it any further. *Please note that we are not responsible for any malfunctions, damages, or accidents that occur due to rental, auction, second-hand sales, or transfer.
