Because waders are an enclosed space, the temperature difference between the water temperature and the outside air and the air warmed by body heat often causes condensation, resulting in dampness inside the waders. This often causes the clothing and skin inside the waders to get wet. It is estimated that a person sweats 50cc per hour even when standing still, and 500cc per hour when walking. In winter, even a small amount of sweat can cause clothing to get damp. If you can't tell the difference between condensation and a water leak, please refer to the following method for checking for water leaks.

To identify a leak in your waders, first dry them thoroughly, then fill them with plenty of tap water.
[Check for water leaks]
If water seeps out or if there is a large hole, water will spurt out. The area where the leak is coming from is the leaking area.
[Marking water leak locations]
If you plan to repair, mark the leak, drain the water from the waders, and dry them thoroughly.
*If there is no water leak, it is likely that sweating or condensation is the cause.

To locate a leak in your waders, first dry them thoroughly. Then fill them with plenty of tap water. Water will seep out or, if there is a large hole, will spray out. This is the leak. If you plan to repair, mark the leak, drain the water from the waders, and dry them thoroughly.
*If there is no water leak, it is likely that sweating or condensation is the cause.

If you are repairing it yourself, please see here.
https://www.youtube.com/watch?v=2fEqw1Ld7xI

DRESS's "Airborne Chloroprene Waders," "Airborne Chest High Waders," "Hip Waders," and "Airborne Chest High Waders for Kids and Women" are produced overseas to offer high cost performance and affordable prices. Requesting repairs or restoration from an overseas factory would increase shipping costs, time, and expenses, and repairs in Japan would be excessively expensive compared to the product price. For these reasons, we regret to inform you that we do not provide repairs or restorations, including repairs for water leaks and resoling. We appreciate your understanding.

●Response to initial defects We take great care in manufacturing our products, but if an initial defect such as staining or damage is found, we will determine it to be an initial defect and will replace it with an equivalent product. For inquiries about initial defects, please contact us via the support page of the DRESS official shop, providing detailed information about the situation.