DRESS Wader Repair Kit
Waders are back in good condition! Water leaks are easily repaired!
●This wader repair set is ideal for repairing holes and tears that occur during use.
●Includes sandpaper, repair pads, and strong wader adhesive, all of which are necessary for repairing waders.
●One-component, fast curing.
●This product is solvent-free and environmentally friendly.
●It has initial adhesiveness, making repairs relatively easy.
●Because it is an elastic adhesive, it has good peel adhesion and stress relaxation properties against vibration, impact, etc. It also has good adhesion to different materials.
Use it to repair waders/chloroprene waders made of nylon fibers. It can also be used to repair boots, hip waders, and chloroprene products.
■ Capacity: NET 10ml
■ Ingredients: Special polymer containing silyl groups
Appearance: Translucent
■Viscosity: 100Pa-s
Repair procedure:
1. Before starting work, clean the area around the wound with water or other liquid to remove any dirt. Then, use sandpaper to polish the area around the wound so that the adhesive can adhere more easily.
2. Cut the repair pad to fit the size of the wound and peel it off from the backing.
*It cannot be adhered as is, so be sure to peel it off before use.
3. Apply a thin, even layer of wader super glue to the wound. Wait 5 to 10 minutes for the glue to reach the right viscosity.
4. Apply a thin, even layer of wader super glue to the repair pad. Wait 5 to 10 minutes for the glue to reach the right viscosity.
5. Attach the repair pad and tap it with a hammer to remove excess air and increase the adhesive strength.
6. Once the repair pad is glued, place a weight on top and let it dry for about two days and it's complete.
*Please do not use for purposes other than the intended purpose. *Although we take every precaution to ensure quality, please check for any damage before use. Do not use if there is any defect. *We are not responsible for any damage caused by incorrect use or accidents that occur while using this product, so please handle with care. *The color may change depending on the usage conditions and deterioration over time. *Printing misalignment may occur due to manufacturing. Please note. *Please refrain from using near fire. *If it accidentally gets into your eyes, wash with clean water for at least 15 minutes and consult a doctor. *If it gets on your skin, wash thoroughly with water or soap. *If any abnormalities occur in the human body, stop using it and consult a doctor. *Do not inhale or eat as it is harmful to the human body. *When using this product, be sure to use appropriate protective equipment. *Do not leave within reach of children. *This is an industrial product, so do not use it for household products. *Please make sure that the usage and purpose are appropriate before using. *To prevent deterioration and contamination, be sure to store it in a sealed container. *Store away from direct sunlight and in a cool place between -5 and 25 degrees. *After use, remove the air from the tube, wipe off the glue from the opening of the tube, and store with the lid tightly closed. *Product specifications may change slightly without notice for each lot.
