












DRESS Block Float


●You can freely attach commercially available blocks (such as Lego models) to the top surface to create your own original float!
●Ideal for casting sabiki and cage fishing!
-DRESS original mini figure included!
-Highly visible red body!
■ Suitable weight: Approx. 8-10 (30-37.5g)
*The appropriate weight may change depending on the block you combine on top. Please temporarily assemble the blocks and test to check the buoyancy before use.
Float body: approx. outer diameter 50 x height 102mm
ABS resin
*This product is a set of the main float and a mini figure. The blocks included in the photo must be purchased separately. *The suitable weight is 8 to 10 (30 to 37.5g), but if you combine a block on the top, the suitable weight may change. Please assemble the blocks temporarily and check and test the buoyancy before use. Also, if the blocks are stacked high or the center of gravity from the top is not the center of the float, it may not be balanced. In that case, please note that it will not be able to be used as a float. *If you attach a commercially available block, you must glue it to this product to prevent it from falling off. Also, please note that the blocks of the included DRESS original mini figure are not glued. Even if the blocks are glued, they may fall off if they are hit against a hard object, dropped, or depending on the usage conditions. *Please attach a snap with a float stopper to the through hole at the bottom before use. *Due to individual differences, some blocks may fit loosely or tightly with the blocks. Please note. *Do not use for purposes other than their intended purpose. *Although we take every precaution to ensure quality, please check for damage before use. Do not use if there is any problem. *We are not responsible for damage caused by incorrect use or accidents that occur while using this product, so please handle with care. *If left in direct sunlight, in a car under the hot sun, or in a hot and humid place for a long time, it may deform, discolor, or deteriorate. *The float body is glued at the top and bottom. It may be damaged or water may get inside if it is hit against a hard object or dropped. *If the appropriate weight is not attached, it may not be usable as a float. *After use, wash with fresh water, dry thoroughly in a well-ventilated shade, and store in a cool, dark place. *It may discolor depending on the usage conditions and aging. In addition, friction may cause the printed part to fade or transfer to other objects. *Due to manufacturing, printing may be misaligned. Please note. *When storing, keep out of reach of small children. Also, be careful not to put this product in. *Product specifications may change slightly without notice for each lot.